This is the second version of my Nebula camera mount for Creality frames. The first version used side support brackets, but after testing I found they could cause failed prints, add unnecessary time, and reduce stability.

What’s new in V2?

Simpler design – eliminated the extra brackets that were prone to breaking

Faster print – reduced print time compared to V1

More stable – cleaner mount that holds the camera firmly

Easier to use – only requires removing the camera from its swivel bracket, rotating it 180°, and placing it back for angle adjustment

The mount clips onto the frame with slight force and holds solid, no extra accessories required. There’s still an optional M6 screw (~5 mm height) for extra security if you want it locked in place.

Print notes:

Material: I printed in PETG, but PLA should work fine too

Orientation: Print on its side with supports

Bed adhesion: Recommend a raft or brim of at least 5 mm (I used 8 mm)

This upgrade keeps the camera at the perfect height for most models, lets you slide horizontally to find the right position, and avoids the weak joints I found in my first design. Stable, practical, and easy to reposition.

Nebula Camera Slider Clip-On Mount – V2 for Creality K1 SE

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill