Design

The Ninja Power Blender Pro Muffler Cover is designed to minimize noise during operation, ensuring a quieter kitchen environment. Its sleek design complements modern kitchen appliances while serving a practical function. This cover is for use with the 24 oz. blender cups and NOT the 72 oz. pitcher. 2 versions: Split & Full. Split is 2 piece and can be printed on 2 350mm plates like the K2 plus. Full is a single model and needs to be printed on something like a Sovol SV08 Max for the additional height requirement.

Use

This cover is used to reduce noise when blending, perfect for early mornings or late-night smoothie cravings without disturbing household members. With PLA and a 50% Gyroid infill a reduction of around 10 decibels can be observed while blending. Higher infill percentages, more walls, and different infill types can result in better,or worse, sound reduction.

Printing Recommendations

Use PLA for decent sound insulation. Recommended print settings include a medium to higher percentage infill for balance between strength, sound insulation, print time, and how much filament is needed, with a layer height of 0.2 mm. You can enable adaptive layer height if you desire a smoother exterior.

Assembly Instructions

Simply place the cover over the blender when in use. Ensure it is aligned properly for optimal sound dampening effect. No additional assembly is required with the full print model version. If printing the split 2 piece model you can glue the 2 sections together for maximum sound deadening or just slot them together when used.

Ninja Power Blender Pro Muffler Cover

0.2mm layer, 3 walls, 50% gyroid infill, organic supports

0.2mm layer, 2 walls, 15% infill