02 meters total size

Can be printed in a 200mm x 200mm printer, since I splited in a lot of smaller pieces, as shown in images.

Can be mounted only glueing, or attaching a wood broomstick inside it

There is spot for a wood broomstick inside, so you can create a more resistent piece, thinking in cosplaying use

I also attached a link for a wood broomstick that would fit perfectly, but any wood stick with the exactly size: 152cm x 2,7cm diameter, will fit well

If you think in resize the piece, remember to resize ALL pieces proportionaly

and, ofc, the inside wood spot will change its sizes if you change the size of the pieces

A real joust lance would have more than 3 meters lenght, but for a cosplay this is not very suitable, which is the reason I've made with 2 meters

Can also be used as a great decorative item

IMPORTANT: the colors will need to be painted manualy after printing, since I didnt slice the piece to be printed colored

Since its a big piece, will work well by painting after printing.

Also, its interesting to paint after assembly, to make sure you will match the colors position correctly

Easy to assembly

May require a few supports insied some pieces, but very few

Most pieces wont need any support

Didn't test print it, but if I did, I would use this settings, printing in PLA:

-Dynamic Quality: 0.20mm

-Printing Temperature: 200 (230 for V-Silk)

-Build Plate Temperature: 70

-Speed: 40 mm/s

-Build Plate Adhesion Type: None

However, due to resistence, I would highly recommend printing in ABS

Real Size Medieval Lance - Knight Joust Cosplay