Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 112.5x200mm in size

You may print at higher layer heights below the Base Thickness of 0.52mm

The Max allowed Thickness is 3.08mm and the Actual Thickness is 2.28mm

Filaments Used:

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3

#ff7713 PLA+ Sunlu Sunny Orange Transmission Distance: 8

#8c9099 PLA PolyLite Grey Transmission Distance: 1

#d09139 IMAGE #d09139 Transmission Distance: 1

#e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 6 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

!!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!!

Swap Instructions:

Start with Black

At layer #7 (0.68mm) swap to Blue Gray

At layer #11 (1mm) swap to Sunny Orange

At layer #16 (1.4mm) swap to Grey

At layer #20 (1.72mm) swap to #d09139

At layer #21 (1.8mm) swap to White for the rest.

RENGOKU-HUEFORGE