"This 3D Render is of the Actual Digital Model, Not AI-Generated."

Get ready to bring some serious holiday drama to your display case! this is an epic, collectible statue capturing Santa on a powerful, dynamically posed reindeer. It's a gorgeous blend of classic Christmas charm and bold, stylized sculpture, full of sweeping motion. Whether it's for a festive shelf centerpiece or a premium resin showpiece, this model is designed to impress!

Size & Scale
The statue stands a powerful 180–200 mm tall (that's about 7–8 inches) including the incredible flowing base that adds so much motion. The best part? It's fully scalable, so feel free to shrink it down for a figurine or blow it up for a massive, eye-catching display!

Print-Ready Versatility (STL Included)
We’ve made sure this model is a joy to print, no matter your machine. You get two expertly prepared STL options:

The Big One (Full Statue): A complete single piece for those of you with massive resin vats or perfectly dialed-in, large FDM machines.

The Smart Way (Split / Keyed Parts - Recommended!): The model is expertly divided into keyed sections. This is the best way to guarantee:
Effortless support removal (bye-bye frustrating clean-up!)
Cleaner surface quality, especially on those delicate antlers, the flowing cloak, and the slender reindeer legs.
Safer printing for all those beautiful, thin, and extended sculptural elements.

Technical Quality: Guaranteed
Rest easy knowing the mesh is absolutely flawless. It’s a fully optimized watertight mesh with zero issues—no holes, non-manifold edges, or sneaky intersecting geometry. It has been verified and is print-ready for all the major slicers (Chitubox, Lychee, ****, PrusaSlicer, Bambu Studio).
3D printing settings

Recommended Printing Settings

Resin Printing (For Maximum Detail)
The fine textures on the fur, Santa’s beard, the fabric folds, and the antlers truly shine with resin.
Layer Height: Go for 0.03–0.05 mm to capture all that beautiful stylized detail.
Exposure: Standard 2–3 seconds per layer (tweak based on your resin/screen).
Bottom Layers: 4–6 layers at a beefy 28–35 sec exposure for rock-solid bed adhesion.
Critical Supports (Use Medium!): Focus on the following zones:
Antler tips and branching intersections.
Reindeer's raised front legs.
The dramatic edges of Santa’s cloak and scarf.
Underside of the saddle and belt.
The sweeping tail of the base/“wave” curve.

Orientation Tips:
Tilt the model 20–35 to minimize flat surfaces.
Point the antlers upward to minimize scarring on the main display surface.
Keep Santa’s face tilted slightly upward for the cleanest facial details.
Post-Processing: Standard wash in IPA (5–7 mins), fully dry, then cure for 5–10 minutes depending on your resin’s opacity.

FDM Printing (PLA / PETG)
Thanks to the statue's wide curves and supportive base, FDM printing is totally achievable—perfect for a strong, large display piece!
Layer Height: 0.12–0.16 mm for a clean decorative result, or push it to 0.08 mm if your machine is a high-detail beast!
Nozzle: Standard 0.4 mm, but a 0.25 mm is an optional cheat code for super clean antlers.
Infill: 12–18% is fine for a beautiful display piece. Bump it to 20–25% for larger models.
Supports: Required for the antlers, the reindeer chest, Santa’s coat edges, and the flowing base.
Pro Tip: Use Tree Supports—they are the easiest to remove!

Blockers: Don't forget to use support blockers under large, broad surfaces (like the saddle) to save material.
Walls / Shells: Use a minimum of 3 perimeters for strength, especially where those elegant legs narrow.
Temperatures (PLA): Nozzle: 200–210C / Bed: 55–60C

Adhesion: A Brim is essential for stability on this tall, dynamic pose. A Raft is also helpful if your printer isn't enclosed to prevent any wobbling.

Santa Riding Reindeer – Christmas STL Statue | 3D Printable