For every fellow coffee nerd out there, you know the importance of getting an even and repeatable tamp. I present to you the Semi-Automatic coffee tamper!!

It is designed for 54 mm portafilter baskets, and I use it daily on a Breville Barista Touch.

To assemble the 3 parts, simply glue the lower half on to the upper half, while it is in the hole. DO NOT glue it before it is in the hole, or you will have to rip it apart and glue it again. I would recommend roughing the glued sides up to make it stick better.

To use it, simply insert the portafilter into the tamper, and push on the plunger. This will give you a consistent and perfect tamp. It will be level, and you won't need to worry about how you are doing it, like you do without this.

I spent a lot of time on this! I know that it might be simple for someone who is experienced on fusion 360, but I am definitely not. I would really appreciate a like, a download, and a boost!

Print settings below:

Slicer software - Creality Print 6.1

Printer - Ender 3 Max Neo

Filaments - Creality PLA

Infill - 10%

Nozzle Temp - 220

Support - Organic Tree On build plate

Semi-Automatic Coffee Tamper

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill