Sexy shoes with high heels.

Contains 6 files Left and Right. stl,3mf,gcode

Was very happy with the result, smooth and nice surface. The heel was the hardest to keep in place for each layer that was made. Solved this with a plate between the foot and heel.

The shoe is made in PLA but would have been nice also in TPU

The shoe will be used for display purposes, wear the shoe at your own risk :)

Shoe size:

scale size 36/ 100%

size 39/ 106.98%

size 43/ 116.28%

It is advantageous to add cub on the bottom for support as raft cannot be used when the model is not flat. Choose yourself.

The shoe is best at a 35 degree slope.

The heel is difficult for support to hold, I have added a plate on two models, left, right. Choose which one you want to use.

The plate can then be removed when the shoe is finished. (Razor blade or DREMEL tool)

In slicer there is a warning about a serious conflict but nothing to worry about as it works anyway and keeps the support from falling off the bed. Choose yourself.

Install z gap manually

install support blocker manually

The pictures show seam red for forbidden and green for approved. Choose yourself where you want the seam.

settings:

Seam position: Install zgap

Number of walls: 4

Infill: 10

Support yes: tree

Border angle 30

Build plate only

Remove small overhangs

Top z distance 0.1

Manual draw seam

Manual block support at the top of the shoe there will be some threads but can be scraped away.

Please check out my other models.