Single coffee maker, for cloth/cotton filter

No Support required for printing

Made for cloth filter of 70mm diameter

There is an extra file included, in case you dont have a cloth filter of this measure and would like to create your own

You can use this extra file as base to fill with cloth and create your own filter

Total piece size, after assembly is: 166mm height and 100mm diameter

Single pieces sizes: base 100mm / pole 166mm / top 93mm (this fits all printers)

You can glue it when you assembly, but you dont have to (I prefer not glued so its easier to wash)

You can print it in any color you'd like

Or print and paint as you prefer

On my tests, the PLA could hold the temperature easily, it wasnt a problem

But if you prefer, you can print in ABS

No support required

Printed using this settings printing in PLA:

-Dynamic Quality: 0.20mm

-Printing Temperature: 200 (220 for vsilk)

-Build Plate Temperature: 70

-Speed: 35 mm/s

-Build Plate Adhesion Type: Brim

But feel free to change and use the settings you prefer (it may change a lot based on your printer)

Didn't test it on a resin printer, or in ABS.

Single Serve Coffee Maker - Cloth Filter - Individual