I designed this mount completely from scratch to give the Nebula camera a stable, adjustable position on my Creality machine. The mount clips snugly onto the frame — either on the front or the sides — and sets the camera at the perfect height for most models. You can also slide it horizontally to get the best angle.

No extra accessories are needed, but I added a screw option (M6, ~8 mm) for anyone who wants extra security. It takes a bit of force to clip on, but once in place it holds solid.

This is my second version — the first was too narrow and lacked side support, so I redesigned it for strength and usability. Other designs I tried were brittle or had weak joints, and I wanted something that could stay centered but also move out of the way when needed.

Print notes:

Material: I used PETG, but PLA should also work fine

Orientation: Print on its side with supports

Bed adhesion: Strongly recommend a raft or brim (≥ 5 mm; mine was 8 mm)

Hardware: M6 screw, ~8 mm height (optional)

Fits snug, holds firm, and keeps the camera right where it’s needed.

Slider Clip-On Frame Camera Mount for Nebula Camera on K1 SE

0.2mm layer, 2 walls, 15% infill