If you work hard and a lot, you will also get dirty. But hygiene and care are also very important and really sensible. There are so many great dispensers that are moved automatically or by a mechanism to dispense soaps or creams. So far so good, but all these devices often drip and this leaves unsightly stains on the floor that someone has to clean up. This is now a thing of the past! Here is a drip tray that can easily be placed on the wall under these dispensers. Included are two different grid inlays that you can use. It also looks great if you print it in two colors, try it out!

Mounting is easy, you have the option of sticking a holder to the wall with double-sided adhesive tape. It depends on the material and the condition of your wall whether this solution will hold. Alternatively, the holder can also be screwed on with two screws. At least that will always hold ;-)

1. You print out all parts in your winch color!2. Attach the holder to the wall.3. Simply slide the collection tray / bowl onto the holder.4. You place a grille of your choice in the tray (alternatively, an aperture ring can also be inserted if you don't want a grille.

Which parts do you need?1. the soap dispenser tray.stl2. the soap dispenser tub_holder.stl3. one of the soap dispenser tubs_grid_v1.stl, soap dispenser tubs_grid_v2.stl, or soap dispenser tubs_blende.stl

I recommend the following printing parameters:- PLA, PETG, ABS or preferably ASA- min. 3 walls- use support material (necessary for the tray!)- min. 25 % filling

Soap dispenser drip tray / dish, no more stains on the floor