Owl on a branch

This hueforge was inspired by a painting sent to me by a precious lady, and I thought it would look great as a Hueforge, so with help from Russell at JunkHouse, we came up with this beauty. I hope you like it!

Print settings:

Printed on a Creality Hi.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm

This Hueforge is 122.73x220mm in size.

You may print at higher layer heights below the base thickness of 0.5mm

The max allowed thickness is 2.26mm and the actual thickness is 2.02mm

Print time 3 hours 45 minutes.

Filaments used:

Ender PLA Black distance: 0.5

Generic PLA Blue Grey distance: 2.1

Generic PLA Natural Skin distance: 8

Ender PLA White distance: 5

This print uses 4 unique filaments

Swap instructions:

Start with Black

At layer #11 (0.9mm) swap to Blue Grey

At layer #14 (1.14mm) swap to Natural Skin

At layer #19 (1.54mm) swap to White for the rest.

Take a look at the awesome Hueforge models Russell's created - https://www.crealitycloud.com/user-profile/1168105986

@JunkHouse

Solitary Owl hueforge

Owl HueForge - 0.08mm layer, 1 walls, 100% infill