Very important info

Made in K2 plus with Ender PLA

Spike ball: This is a 5" diameter sphere with spikes extending beyond the diameter. It should fit in most printers fairly easily. I tried printing this 3 or 4 times before realizing that the best and fastest way is to use Tree hybrid supports while the long pin with a hole is placed flat on the build surface. If it is not printed like this, you may end up having pieces of the points come off or you might end up using more filiment for supports than you need.

Flail adapter: The only part that has a round nose needs to be rotated so that the round section is facing upwards and the flat base with the spikes are faced towards the build plate.

All other parts: No supports were needed in the K2 plus. Just make sure parts are standing upright.

This is a prop, but it is more pointy than it looks. Do not maul anyone or anything without expressed written permission. Obtain video of the signature. Tis not always just a flesh wound.

Super glue all mating parts together. If you do not superglue all mating parts together, you will be the laughing stock of me.

Not all parts are required for 1 build. The parts are of different lengths and sizes for customization.

Flail photos coming soon. Chain may not be designed by myself, but there are lots of excellent resources on the Creality Cloud for excellent chain made by very talented programmers.

Morningstar/flail prop

0.2mm layer, 2 walls, 15% infill