Read carefully! If you download the STL file only, be very careful about how you orient the hooks and hangers, and don't be afraid of supports. The recommended print settings are below.

100% infill

0.2 mm layer height

Brim required (auto off - default 5 mm)

Supports required (organic tree auto with 0.25 top z distance)

I ran out of hooks and hangers so I reverse engineered the ones I had to make more. Hope it helps!

------------------------

Design Concept

The design aims to optimize organization tools for a pegboard system using 3D-printed hooks and hangers. This provides customized and flexible storage solutions while maximizing the utility of standard pegboards.

Purpose

These hooks are designed to hold various tools and objects, such as screwdrivers, calipers, and other light equipment. They provide easy access and organized storage in workshop settings.

Printing Suggestions

Use strong and flexible filament materials, such as PETG or ABS, to ensure durability under load. 100% infill required for maximum strength. Printing in PLA achieves enough strength for light tools.

Assembly Instructions

Once printed, simply snap the hooks into place on the pegboard. Adjust the arrangement according to your specific tools' shapes and sizes to maintain optimal accessibility.

Standard Peg Board Hooks and Hangers

0.2mm layer, 2 walls, 100% infill

0.2mm layer, 2 walls, 15% infill