You can use it as a normal mold or use these tools in a housing to create a silicon mold

For artesans

Can be used to create models of: EVA, Foam, Craft, Silicone, Chocolate, etc - but mostly for artificial flower arrangements/decorations/etc

I believe the options I made can fit many different creating process

Includes, as shown in images:

- Male Piece (Positive)

- Female Piece (negative)

You can press one against the other to create a mold

Or you can use male piece to create a template/housing for a silicon mold

-Size Pre-set - Male 80mm - but feel free to resize as you need, just remember to resize both pieces in same proportion

No support required

Didn't test print it, but if I did, I would use this settings printing in PLA:

-Dynamic Quality: 0.12mm

-Printing Temperature: 200 (220 for vsilk)

-Build Plate Temperature: 70

-Speed: 35 mm/s

-Build Plate Adhesion Type: Brim

But feel free to change and use the settings you prefer.

Didn't test it on a resin printer, or in ABS.

Other printers will use different settings, so follow what you are used to, just be aware that the higher the resolution, better the details.

Star Mold - Silicon Maker Template