Created as a bold maker’s emblem, the “Storm’s Custom 3D Prints” plaque blends clean geometry with a strong, readable faceplate. Designed for durability and visual impact, it balances smooth surface finish with crisp lettering so it stands out whether displayed in a workshop, office, or creative space. The structure is optimized for strength without excess material, ensuring a lightweight yet sturdy piece.

Print Settings

Printed on ******** Kobra 3 in approximately 58 minutes using PLA silk filament.

• Layer height: 0.16 mm- 0.10mm for fine detail

• Infill: 20% grid for strength without weight

• Supports: None required for the main body; use brim for adhesion if needed, mine did not need a brim

• Filament: orange silk PLA

Assembly

No assembly required — the plaque is a single, finished piece straight off the print bed. For mounting, use double‑sided adhesive strips, command hooks, or pre‑drilled holes (if you choose to add them) to secure it to your desired surface.

Attribution

This design is freely shared under the CC BY license. You’re welcome to print, remix, and adapt it — for personal or commercial use — as long as you credit Storm’s Custom 3D Prints as the original creator. Think of it as carrying the maker’s mark forward: every time it’s shared, the storm’s name rides with it.

StormsCustom

0.2mm layer, 2 walls, 15% infill