Super cute money box for your dream!

You can scale this money box by +-25%! But even in its original size (min. 200 x 200 x 200 mm), it is perfect and ideal for saving money. This money box has a classic design, so you can't get to the contents without breaking it. Celebrate the moment you realize your dream and simply print out a new money box. Maybe even in a different color combination.

Once you have printed out all the parts, lay them out in front of you and start with the front. First glue the frame onto the monitor, then the cover and finally the monitor with the frame. Now place the back of your piggy bank on the back and glue the back from above/inside into the housing; the paragraph shows you which way round to insert the back wall. Then you can glue the front into your piggy bank from above. Now all you have to do is arrange the four feet and glue in the pins. The pins show you which foot needs to be glued where on the bottom of your piggy bank. Once your piggy bank can stand on its own, you can glue the small pins into the antennas and glue the antenna with the pin to the designated spot on top of your piggy bank. Done!

If you like this piggy bank, leave me a “LIKE” and good luck with your savings.

I recommend the following printer settings:- PLA or PLA+- Two or three colors of your choice- Min. 2 walls- 10% infill- Support is only necessary for the monitor!

Note:- You can also leave out the monitor and use the picture frame instead. Then you can stick a photo on it and give your goal a face. Everyone will then know what you are saving for and can support you ;-)- How did I make these cool grid patterns? It's easy, I did it in Slicer and deactivated the bottom and top layers. This exposes the filling, which you can choose from numerous patterns. However, you should then set at least 6 walls and also deactivate the function for only one wall in the bottom and top layers! Give it a try.

Super cute money box for your dream! Cool Old TV Edition!

0.2mm layer, 7 walls, 15% infill