🧱 Support Skid / Rail for 50L Water Container
I designed a simple but practical support skid/base for a large 50-liter water container.

(https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099615006201)

For my setup, I use a total of three skids. Their purpose is to keep the container from resting flat on the floor with its entire surface. Instead, the tank stands only on a few support points, making it much easier to clean underneath and keep the area hygienic.

This design is especially useful for:

workshops
hobby rooms
gardens
storage areas
cleaning environments

The model was printed in white PETG. Thanks to the reinforced wall thickness and sturdy construction, the skid is suitable for heavier loads.

⚙ Print Settings
Printer: Creality K2 Plus
Material: PETG (white)
Nozzle: 0.4 mm

Layer height: 0.24 mm
First layer: 0.24 mm
Scarf Seam Beta: Contour
Wall order: Adaptive
Wall loops: 6
Bottom layers: 5
Top layers: 5
Infill: 25%
Infill pattern: Grid
Overhang speed: Classic Mode

🔧 B2P4U Engineering Works
Functional Design • Digital Fabrication • RC & Model Engineering

Designed with an engineer’s mindset. Built for real use.

Support Skid / Rail for 50L Water Container

0.24mm layer, 6 walls, 25% infill