This money box/piggybank, when printed at the provided size, can output coins of 2.5cm diameter at the base but can devour coins of 3 to 4cm diameter.

The coins are inserted into the mouth and can be removed by unscrewing the cap at the base or tipping the piggybank forwards for coins to come out of the mouth.

The 3MF was made in Bambu Studio and may not open in Creality Slicer.

Supports are required on this model. The Ankylosaurus and Stegosaurus are not included and are in my model store.

Use the “tree” support style, and don't use any brims.

Printing it larger is always recommended. Do not print it any smaller unless the coins you intend to use are small.

I recommend printing it with matte filaments as it shows the scale details better and is easier to paint on.

Whilst a solid version of the model is provided, to reduce the amount of scarring from supports, I advise using the “chopped” version.

This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required.

If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards

T.Rex Moneybox

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill