Design Concept

The USB servo motor-powered turntable is designed for display or photographic use, offering controlled rotation for any object mounted on it. Its design is minimalist yet functional, assuring that the focus remains on the objects displayed. The turntable has a minimum speed of around 3 rpm and a load capacity of 2.3kg/80oz. It is a useful addition to the ring light frame for smart phone https://www.crealitycloud.com/model-detail/ring-light-frame-smartphone?source=5.

Purpose

Ideal for scanning, showcasing products, collectibles, this turntable provides a convenient solution for dynamic view presentation and filming.

Print Recommendations

Print using PLA. Printing with a layer height of 0.2mm should suffice for the necessary detail. Infill of 20% is recommended for stability without excess weight.

Assembly Instructions

Components used all available on Amazon :-

Servo motor DS04-NFC 360 Degree Continuous Rotation Micro Servo Motor

https://www.amazon.com/dp/B079FT3RTZ?ref=ppx_yo2ov_dt_b_fed_asin_title

3CH Digital Multi Servo Tester ECS RC Consistency CCMP Master Speed Controller

https://www.amazon.com/dp/B079FT3RTZ?ref=ppx_yo2ov_dt_b_fed_asin_title

for power either use a 4 Cell AA Battery Holder Case with JR Connector 2P Black Red Wire

https://www.amazon.com/dp/B09NNKJD74?ref=ppx_yo2ov_dt_b_fed_asin_title

or a USB power pack and for the usb power lead either make your own as I did from a usb cable

or a USB 2.0 A to USB 4 Pin Dupont Motherboard Header Adapter, USB Male to 4Pin Female 28AWG Extender Cable.

https://www.amazon.com/MEIRIYFA-USB-Motherboard-Adapter-Extender/dp/B0BV9K69M9/ref=pd_ci_mcx_mh_mcx_views_1_image?pd_rd_w=CBzxv&content-id=amzn1.sym.679481c3-2bf4-4843-80c0-ffb319282e84%3Aamzn1.symc.c3d5766d-b606-46b8-ab07-1d9d1da0638a&pf_rd_p=679481c3-2bf4-4843-80c0-ffb319282e84&pf_rd_r=ESVYCN8QNW6EQYT1W9ZJ&pd_rd_wg=1dtNi&pd_rd_r=2cec94c5-1b45-4902-8316-7314f39c7453&pd_rd_i=B0BV9K69M9&th=1

The roller base takes 3 rollers available on Amazon https://www.amazon.com/dp/B07VGGVXMH?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1. The rollers are a tight fit so I used hot water to soften the holes before pushing the rollers into place.

Everything is push fit apart from the servo controller which is attached with double sided tape to the front panel.

The base of the turntable top which runs on the bearings needs to be smooth for best operation.

Turntable with USB motor

Print Settings for Creality Hi O.2mm Layer

0.2mm layer, 2 walls, 15% infill