Make your phone case as unique as you are!

This is a fully customizable, modular phone case designed specifically for the IPhone 15 Pro. Instead of being stuck with one design, this case features a unique grid system that lets you swap out inner tiles whenever you want to change your style.

What’s Included in this Download:

Hexagonal Case Design with Camera Shell

Pre-made Custom Inserts: A collection of ready-to-print tiles featuring artwork, logos, and designs so you can start customizing immediately.

Blank Insert Templates: Want to make your own? Use these Plain tile STLs in your preferred CAD software to add your own name, custom logos, or artwork!

How it Works:

Print the main phone case frame in TPU

Print the camera shell in PLA (or your prefered harder-than-TPU material)

Print your choice of decorative tiles in PLA (or your prefered harder-than-TPU material)

Snap the camera shell in to the case for added protection and the tiles into the cutouts on the case. They fit snugly but can be pushed out whenever you want to swap your style!

Main, Centre Insert: centreRectangle stls

Lower, Small Square Insert: smallSquare stls

Lower, Rectangle Insert: lowerRectangle stls

Recommended Print Settings:

The Main Case:

Material: TPU (Flexible filament) is highly recommended. It provides the necessary drop protection and makes it much easier to snap the phone in and out.

Layer Height: 0.1 - 0.16 mm if possible, but not strictly

Infill: 15% Triangles.

Walls/Perimeters: 2 is fine

Supports: Only Manual/Painted Normal, snug supports on the bigger openings (check example included in the images).

Top Z Distance: 0.3 mm

The Swappable Inserts and Camera Shell:

Material: PLA or PETG work perfectly.

Colors: For multi-color inserts, make sure to add your colors in the slicer or add a "Pause at Height" command in your slicer to swap filament colors for the top layers of the artwork if needed.

All questions, Makes, and any feedback are greatly appreciated,

If you design your own tiles using the blank templates, be sure to share a remix! I'd love to see what you create

The Ultimate Customizable Phone Case | IPhone 15 Pro

0.2mm layer, 2 walls, 15% infill