Miniature Retro Lunch Box.

In a Facebook group someone was looking for a miniature lunch box so I designed this on TinkerCad.

Box Dimensions are roughly 37.6 x 42.8 x 26.1 mm.

I used a modifier negative part in the hinge area as guides to drill. I did not make it go all the way through. My thought was drill through the hinge with lid on the box so drill makes to 2 hole line up. The negative modifier just helps start the drill bit. I used a hand held pin vise to drill the holes. I used .032 music wire for hinge pins and 18gs hobby wire for the D-Rings for the handle.

The main box has a built on support in the STL file. It will snap off with the use of pliers. You may have to clean up the lip a little.

I use printable vinyl and a Cricut to make the stickers. I used googled images, cropped, and measured the box after being printed to size the images to print and cut with Cricut.

I constructed the handle prior to gluing with accelerator to the box.

I plan on working on the design some more like increasing the lip on the box so the lid snaps closed better.

Print lid on a raft I use 5 layers. Hinges down.

Link to thermos

Creality Cloud -Mini Thermos From standbackcff https://www.crealitycloud.com/model-detail/69bd5345829419ea05261daf

Updated Handle retro Miniature lunch box.

0.08mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill