NOTE: The dragons are not included! You can find them both in my collection of models to purchase.

These stands have been designed to work with my "Version 2" articulated dragons.

They come in 3 bend styles and 2 heights.

The curves have been made to support the width of my Dragons links when printed at the largest size I provide them in. If you made the dragons smaller, they should still fit, but the "hooks" won't likely reach them to hold them in place on the steeper bends.

PETG IS STRONGLY ADVISED.

PLA filament breaks too easily on the bends, as they are thin.

On the S curve and C curve, some hooks are present to hold links in place, so they do not slide off the stands. As these are made to fit my Version 2 dragons, I cannot guarantee anyone else's dragon designs will fit them.

You can mix and match the different stand heights and bend styles to pose your dragon in a wide range of ways, however, be aware that the hooks on the S curve style are intended for supporting the head and neck so they may not fit if using it backwards, for an uplifted tail for example.

This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required.

If you want to sell prints of this model, please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards

Stands for V2 Articulated Dragons

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 3 walls, 15% infill