*UPDATED 02AUG24

-v3.2 After printing I fixed some or the labels that didn't print correctly, the level box was wrongly sized and the fitment of some tools needed fixing.

-v2.1 I added the rotator, stabilizer, and labels. Yup it was killing me.

The wife bought herself one of the WeCreat 40W laser engraver machine. I couldn't just live with the tools in a plastic bag. Today this finally got to me mentally. I looked around for someone else's designs but found zero. So here's my trial at making a tool holder. I tried labeling things to make it better appealing to the eye but wasn't possible for the small stuff. I tried folks. I'm not great but here it is.

Here is how It's supposed to work. Let's see if it does well for you too.

TOP: has cut outs for the front left side of the machine's feet. So if you're looking at the machine it's right side closest to you.

FRONT: the manual can slide in on it's side but will bottom out in order to be able to grab it later.

RIGHT: from left to right,

-the measuring tape can be neatly rolled and slide into the tape box

-the grease tube is next

-the level follows

-the top right shelf,

-back row- flathead screwdriver, three hex ring holder,

-front row- Allen key, hex driver, chuck key, wrench, USB adapter

Folks there you have it. Shoot me a message or whatever and tell me what I messed up or could fix. I'm all for making things better and this is no exception.

Printing settings I used are 0.2-layer height, same first layer, seam aligned, 2 walls, 5 top shell layers, infill 15% because of the weight it holds, thin tree supports build plate only, no brim, by layer

Well happy printing folks!

WeCreat Laser Engraver Tool Holder v3.2

0.2mm layer, 2 walls, 15% infill