Find your moment of calm with the Zen Organic Stone Planter! Inspired by the tranquil beauty of weathered river pebbles, this design features smooth, soft, and balanced curves, perfectly embodying a serene and minimalist aesthetic. It’s an ideal decorative piece for adding a touch of nature and calm to any space.

As pictured, this planter is perfect for holding lush green foliage, like the variegated Pothos, or as a cozy home for your favorite succulents. The clean, untextured surface highlights the smooth, satisfying curves of the FDM print. Simple to print and optimized for FDM, it's a great project for bringing a little piece of the outdoors inside.

3D Printing Guide

This model is optimized for straightforward FDM printing. Print right out of the digital box with confidence.

Material: PLA (highly recommended for a clean, smooth finish, as seen here in matte grey).

Layer Height: 0.16mm - 0.2mm (to capture the smooth, subtle curves and ensure watertightness).

Nozzle: Standard 0.4mm nozzle.

Infill: 15% - 20% (sufficient for strength without excessive material use).

Supports: NO SUPPORTS NEEDED! This design is fully self-supporting.

Orientation: Print flat side down.

Drainage: The model is optimized with built-in drainage holes.

Zen Organic Stone Planter - Minimalist FDM 3D Print

0.2mm layer, 2 walls, 15% infill