>> 模型介绍 | Model Introduction >>>>>>>>

趁着端午的到来，打几个小粽子来烘托一下氛围哈。

With the arrival of the Dragon Boat Festival, let's make some small zongzi to set the festive mood!

物件整体 Overall Design of the Object: X:45mm; Y:26.1mm; Z:38.8mm.

>> 相关模型 | Relevant Models >>>>>>>>

粽子系列 | Zongzi Series



粽子系列 2 | ZongZi Series 2



粽子系列 3 | ZongZi Series 3



>> 打印配置 | Print Settings >>>>>>>>

（仅参考，可自定义）

(Referential, Customizable as Needed)

耗材 Filament：PLA

填充 Infill：15%

填充图案 Infill Pattern：网格 Grid

支撑 Support：需要 Required

Brim/Raft: NONE

>> 组装说明 | Assembly Instructions >>>>>>>>

即打即用，无需组装。

Print and Use Immediately; No Assembly Required.

>> 其他说明 | Additional Notes >>>>>>>>

1. 模型使用 Blender 4.2.5LTS制作。

2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

3. 无论如何，遇见是缘分，能用是巧合，留个言点个赞，关注收藏一起浪。

4. 实拍模型照片无打磨、涂色。

5. 想要让手办、航模、车模等展示类模型更好体现出精致性，请对模型细节处进行细致打磨、粘合以及涂料上色。

1. The model was created using Blender 4.2.5 LTS.

2. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.

3. Anyway, meeting is fate, being able to use it is coincidence. Leave a comment, give a like, follow and save, and let's ride this wave together.

4. The model shown in the actual photos is neither polished nor painted.

5. To better highlight the sophistication of display models such as figurines, aircraft models, and car models, it is recommended to carefully refine, sand, glue, and paint the model's details.

>> 声明 | Statement >>>>>>>>

由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均和本人无关且无任何利益关联。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！

欢迎您通过下载、点赞、关注、收藏、助力的方式表达您对模型的认可和喜爱，同时也非常感谢您对模型的点评。

您若同意并遵循知识共享许可协议“CC BY-NC-SA 4.0”，本人欢迎您对模型页面进行任何形式的站外分享，也非常赞同和认可您对模型进行升级改造后的再分享行为。

Due to limited personal time and energy, I only publish model-related information through personally registered platforms, accounts, and my owned domain (PoweredBy.CN). Any content involving model designs created by me that is posted on non-personal or unauthorized platforms/accounts is unrelated to me and involves no financial or beneficial association. I have always adhered to the principle of "free sharing and open access" online. For publicly released model designs, I will never impose restrictions on downloads (including but not limited to paid subscriptions, membership requirements, point systems, etc.). Please exercise caution and verify the sources.

You are welcome to express your appreciation for my models through actions such as downloading, liking, following, bookmarking, or boosting my work. I sincerely value your feedback and constructive critiques.

Provided that you agree to and comply with the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), I warmly welcome you to share the model pages externally in any form. Additionally, I fully support and endorse the act of sharing the models after they have been modified or enhanced.

粽子系列 | Zongzi Series

zongzi-1

0.2mm layer, 2 walls, 15% infill